RADIUS 40 - 315 is designed to perform saddle cuts on plastic pipes made of HDPE, PP, PV.
The saw performs precise radial cuts, and thanks to a trolley that slide gradually on a scaled instrument, allows a fast
configuration of the cutting radius. Even the pipe support can slide and block small pieces of pipes down to 15 cm
length (6"). The saw rotation during cutting is executed manually and in complete safe conditions since the control
panel and its handles are located behind the machine away from the cutting area. This machine is not suitable to cut different materials from those specified above, including composite pipes that may
contain other substances (polymers, metals, alloys, etc.)
STANDARD COMPOSITION
- Machine body with control panel and saw
INTEGRATIVE SYSTEMS for OMEGA 630-315 and OMEGA 400-315
configuration of the cutting radius. Even the pipe support can slide and block small pieces of pipes down to 15 cm
length (6"). The saw rotation during cutting is executed manually and in complete safe conditions since the control
panel and its handles are located behind the machine away from the cutting area. This machine is not suitable to cut different materials from those specified above, including composite pipes that may
contain other substances (polymers, metals, alloys, etc.)
STANDARD COMPOSITION
- Machine body with control panel and saw
INTEGRATIVE SYSTEMS for OMEGA 630-315 and OMEGA 400-315
Technical features
Materials
HDPE/PP/PVC
Branch pipe OD
40 ÷ 323 mm (1.6" ÷ 12.7")
Main pipe OD
Up to 630 mm (24.8")
Shortest branch length
15 cm (6")
Power supply
110 Vac Single Phase 50 Hz
230 Vac Single Phase 60 Hz
Total abdorbed power
1100 W
Dimensions
1000 x 1566 x 1642 mm
Weight
937 lb (425 Kg)
- ;
-
-
-
