 |  |
This
is a self-aligning machine, suitable for welding pipes for the
transport of water, gas and other fluids under high pressure, up to Ø
30" IPS (800 mm).
Delta 800 can weld fittings such as elbows, tees, wyes and stub-end. This is possible because the 3rd clamp can be anchored to the 1 st and 2nd (movable) and slide along with the pipe.
The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.
- Working
range: Ø 20" IPS to 30" IPS (500 - 800
mm) Delta 800 can weld fittings such as elbows, tees, wyes and stub-end. This is possible because the 3rd clamp can be anchored to the 1 st and 2nd (movable) and slide along with the pipe.
The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.
- Extractable heating plate with separate thermometer
- Milling cutter with safety micro switch
- Electrohydraulic gearcase
- Thermoregulator for the control of the working temperature
ON REQUEST (ACCESSORIES)
- Machine body trolley
- Tool for flange necks
| Pipe range | 20" IPS to 30" IPS (500 - 800 mm) |
| Pipe materials | HDPE, PP, PVDF,PB |
| Fittings butt fusable | elbows, tees, wyes, stub ends |
| Power supply | 400V 50-60Hz, 3 Ph. |
| Total absorbed power | 16416 W |
| Total weight | 2672 Ib |
 |  |