 |  |
This
is a self-aligning machine, suitable for welding pipes for the
transport of water, gas and other fluids under pressure, up to Ø 24"
IPS (630 mm).
Delta 630 can weld fittings such as elbows, tees, wyes and flange necks. This is possible because the 3rd clamp can be anchored to the 1 st and 2nd (movable) and slide along with the pipe.
The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.
- Working
range: Ø 14" IPS to 24" IPS (355 - 630
mm) Delta 630 can weld fittings such as elbows, tees, wyes and flange necks. This is possible because the 3rd clamp can be anchored to the 1 st and 2nd (movable) and slide along with the pipe.
The fitting must be locked in the 4th clamp. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.
- Extractable heating plate with separate thermometer
- Milling cutter with safety micro switch
- Thermoregulator for the control of the working temperature
ON REQUEST (ACCESSORIES)
- Machine body trolley
- Tool for flange necks
| Pipe range | 14" IPS to 24" IPS (355 - 630 mm) |
| Pipe materials | HDPE, PP, PVDF,PB |
| Fittings butt fusable | elbows, tees, wyes, stub ends |
| Power supply | 230V, 50-60 Hz ,1 Ph, or 400V 50-60Hz, 3 Ph. |
| Total absorbed power | 11412 W |
| Total weight | 1263 Ib |
 |  |