 |  |
This is a self-aligning machine, suitable for welding PIPE for the transport of water, gas and other fluids under pressure, up to Ø 18" IPS (500 mm).
The Delta 500 can weld fittings without the need for any additional equipment: elbows, tees, wyes and stub-end can be welded by simply taking the fourth clamp off the machine body's frame. Stub-end with a short neck can be welded with the help of a stub-end holder (on request), applied to the clamps.
Available in 240 V single phase and 400 V 3-phase.
- Working range: Ø 8" IPS to 18" IPS (200 -500 mm)
- Extractable heating plate with separate thermometer
- Milling cutter with safety micro switch
- Electrohydraulic gearcase
- Thermoregulator for the control of the working temperature
ON REQUEST (ACCESSORIES)
- Machine body trolley
- Tool for flange necks
| Pipe range | 8" IPS to 18" IPS (200 - 500 mm) |
| Pipe materials | HDPE, PP, PVDF,PB |
| Fittings butt fusable | elbows, tees, wyes, stub ends |
| Power supply | 230V, 50-60 Hz ,1 Ph, or 400V 50-60Hz, 3 Ph. |
| Total absorbed power | 7925 W - 7190 W |
| Total weight | 802.5 Ib |
 |  |